Fitting Stomp Grip


These clever dicks knows how to do it

User avatar

Master Pie Muncher

Posts: 10178

Images: 0

Joined: Tue Dec 07, 2010 12:03 pm

Location: Cumbria

Post Tue Feb 21, 2012 12:27 pm

Fitting Stomp Grip

First clean the tank at least 3 times to ensure a clean and wax/grease free surface
Image

Warm the Stompgrip and peel back the straightest edge
Image

Either line up the Stompgrip with the edge of the tank or place masking tape as a guide, I used the tank graphics as the guide
Image

Warm up the Stompgrip
Image

Start pressing the Stompgrip at the edge and work from right to left following the contour of the tank
Image

Peel the backing paper off a little at a time and continue to press and work out the little air bubbles
Image

Your fingers may be starting to get sore
Image

Keep the heat on the Stompgrip at each line as the warmer the Stompgrip the less bubbles and the easier to apply
Image

Work the Stompgrip following the contour
Image

Repeat on the other side
Image

Done, Almost perfect.....Take your time
Image
Image
User avatar

Master Pie Muncher

Posts: 7914

Images: 2

Joined: Tue Dec 07, 2010 10:26 am

Location: Bramhall, Cheshire

Post Tue Feb 21, 2012 1:06 pm

Re: Fitting Stomp Grip

Another great walkthrough!
Image

Post Tue Feb 21, 2012 1:25 pm

Re: Fitting Stomp Grip

Must do this to the viffer.....
User avatar

I quite like it round here!

Posts: 5522

Joined: Thu Dec 16, 2010 7:59 pm

Post Tue Feb 21, 2012 4:16 pm

Re: Fitting Stomp Grip

Where'd you get that carbon hairdryer from???
Image
User avatar

Master Pie Muncher

Posts: 10178

Images: 0

Joined: Tue Dec 07, 2010 12:03 pm

Location: Cumbria

Post Tue Feb 21, 2012 4:21 pm

Re: Fitting Stomp Grip

I made it, see other thread :lol:
Image

Post Tue Feb 21, 2012 4:33 pm

Re: Fitting Stomp Grip

Got any stomp grip fatboy???
User avatar

Master Pie Muncher

Posts: 10178

Images: 0

Joined: Tue Dec 07, 2010 12:03 pm

Location: Cumbria

Post Tue Feb 21, 2012 4:37 pm

Re: Fitting Stomp Grip

not on me :dunno:
Image

Post Tue Feb 21, 2012 4:54 pm

Re: Fitting Stomp Grip

Hmmmm gonna have to look for some then lol
User avatar

Master Pie Muncher

Posts: 10178

Images: 0

Joined: Tue Dec 07, 2010 12:03 pm

Location: Cumbria

Post Tue Feb 21, 2012 4:56 pm

Re: Fitting Stomp Grip

what for?
Image

Post Tue Feb 21, 2012 4:58 pm

Re: Fitting Stomp Grip

Viffer...... wheelbarrow has some already apparently :whistle:
User avatar

Master Pie Muncher

Posts: 10178

Images: 0

Joined: Tue Dec 07, 2010 12:03 pm

Location: Cumbria

Post Tue Feb 21, 2012 5:03 pm

Re: Fitting Stomp Grip

it's bike specific mate, I actually prefer TechSpec if i'm honest mate, got that on the R1, yeah there is some on the 750
Image

Post Tue Feb 21, 2012 5:07 pm

Re: Fitting Stomp Grip

Will find some on :eBay: I am sure..... either that or the carbon levers I am looking at :lmao:
User avatar

Master Pie Muncher

Posts: 10178

Images: 0

Joined: Tue Dec 07, 2010 12:03 pm

Location: Cumbria

Post Tue Feb 21, 2012 5:10 pm

Re: Fitting Stomp Grip

Give matt at DT a bell mate see if they do TechSpec
Image

Post Tue Feb 21, 2012 5:15 pm

Re: Fitting Stomp Grip

:ebay: £36 + postage. From USA. Can't get stomp for mine of :ebay: but will ring Matt :ok:
User avatar

I quite like it round here!

Posts: 4903

Images: 4

Joined: Sat Apr 30, 2011 8:34 am

Location: emneth...nr wisbekistan..cambs

Post Tue Feb 21, 2012 8:07 pm

Fitting Stomp Grip

LennyVFR800 wrote:Will find some on :eBay: I am sure..... either that or the carbon levers I am looking at :lmao:

i got some carbon levers off an srad if there any good to ya....


.
Image
i'm not racist.............i'll race any fecka....
Next

Return to How to's & Step by Step Guides

Who is online

Users browsing this forum: No registered users and 1 guest

cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.